IMPORTANT TIP
User Guide, Easy Installation:
1.Determine best path and desired length for led strip (mark strip w/ tape or pen).
2. Begin placement by removing paper portion of 3M adhesive backing being careful not to remove adhesive strip.
3. Continue path making 90 degree turns as follows:
1) Select desired turn spot at white lines / cut marks.
2) Bend length that is continuing up keeping white lines / cut marks at center forming a 45 degree angle.
3) Take the length that is bent up (w/ the 3M logo facing you) and fold it straight down at one side of the copper contacts (the top of the bend should be flat with the rest of the led strip) now showing +, G, R, B or B, R, G, 5V+ as indicated.
4) Continue routing and adhering the strip to the back of the HDTV until desired stopping point is reached. If the led strip is too long, cut at white lines / cut marks. Plug in the usb plug and continue with your set up / operation directions. Enjoy.