(9:00AM to 5:00PM)
Safety notes
Keep out of the reach of children
Eye protection is recommended during use
Cleans blocked HP and Canon inkjet printers quickly and easily.
Watch our tutorials on Youtube by searching for their tags
HP tags: sTOYS8vswS4 and xaGySoXFHDI
Canon tag: qI_W4VKGyRU
Compatibility Notes
✔︎ Compatible with all Canon and HP printers where the cartridges are housed in the print carriage
✘ Not compatible with Officejet Pro series
✘ Not compatible with printers where the ink cartridges remain static during printing
Printer must be clear of all error messages before use, including clean printer head
We recommend using fresh ink from a different supplier after cleaning (if your ink caused the blockage it can block the head during priming)
Each Kit contains
☛ 5 oz Printhead Cleaning Fluid
☛ Syringe
☛ Connector tubing
☛ 1 Pair Green printhead adaptors
☛ 1 Pair Nitrile Powder-free Gloves
☛ Laminated Instruction Card
Instructions for use
1. Print a nozzle check pattern to identify which colors need cleaning
2. Warm up the cleaning fluid and remove ink cartridges
3. Remove printhead (if possible)
4. Connect adaptors to syringe and inject 2ml fluid into each nozzle to be cleaned
5. Leave to stand for 5 min
6. Inject a further 1ml
7. Reinstall head and fresh cartridges
8. Run 2 cleaning cycles to prime printhead
The kit works in 90% of cases and comes with troubleshooting notes.
If the kit does not clean your head please contact us for advice: if we cannot fix your printer we send a $15.00 refund.
