(9:00AM to 5:00PM)
Specification:
Channels:6（PWM）,8（PPM）,18（i-BUS）
Model:Multi-Rotor
RF range:2.408-2.475 GHz
Band width:500 KHz
DSC port:PPM/PWM/i-BUS
Antenna length:93mm（Dual Antenna）
Power input:4.0-8.4V
Range:>300m
Ports:
PWM signal port:GND, VCC. Outputs channels 1-6 PWM.
PPM signal port: Outputs standard PPM signal.
BUS signal port: Outputs i-Bus signal,up to 18 channels.
Voltage sensor port:External power sensor (1S-4S connector) +0 to +18V.
Binding:
1. To prepare the transmitter for binding information refer to your transmitter s user manual.
2. Power on the receiver while holding the bind button. If the reciever s LED is flashing this means it has entered bind mode. After the successfully binding, the transmitter will automatically return to the previous menu. If binding is successful the receiver s LED will stop flashing a remain solid.
3. Check if all the model and receiver work as expected. If anything does not work as expected, restart this procedure from the beginning.
Compatible Transmitters:
The FS-X6B receiver is compatable with all AFHDS 2A Transmitters,for example FS-i10,FS-i8,FS-i6,FS-i6S,FS-i6X,FS-i4,FS-i4X
Package Include:
1* FS X6B Receiver
