(9:00AM to 5:00PM)
High Quality Sound
Low frequency provides soft and powerful sound sounds
Middle frequency provides sweet and mellow sounds (best for vocals and string)
High frequency provides higher pitched sounds
10-100W Sensitivity
Supports 89dB speakers and above
Specifications:
Input Voltage: 110V
Output Power: 8W*2
Frequency Response: 20Hz -- 20kHz
Signal/Noise Ratio: 88dB
Output impedance: 8ohm or 4ohm
Input impedance: 100Kohm
Distortion: ≤1% (1kHz)
Input sensitivity:1V
Tubes: 5Z3P(5U4C)*1; EL34-B*2; 6N9P*2
Package Includes:
1 X Gemtune GS-01M Hi-Fi Tube Amplifier
1 X Power Supply Cable
1 X 5Z3P(5U4C) Tube
2 X PSVANE EL34B Tubes
2 X 6N9P Tubes
Notes:
A. Please use Lineout jack. We do not recommend the use of regular headphone jack to amp.
B. We recommend a warm up time of at least 10-24 hours to stretch the tubes. Please
be sure to adjust the volume so not to damage the speakers before you have reached
24 hours of use.
C. Ensure the amp is plugged into a surge protector. If the output terminal short circuits
while in use, the amp may get overloaded resulting in permanent damage.
D. During use, the tubes reach a very high temperature. Do not touch tubes while in use.
Ensure the tubes cool down completely before removing or replacing them.
E. During use, the amp may reach a high temperature. Ensure the amp is in an open
space and away from any fire hazards.
F. Please power off the amp before changing the input/output methods to avoid damage.
Ensure the amp is in a dry place as damp conditions may lead to damage.
