> Genuine SKYRC iMAX B6AC V2 Dual Power (6Amps, 50Watts): LiPo, LiHV, Li

Genuine SKYRC iMAX B6AC V2 Dual Power (6Amps, 50Watts): LiPo, LiHV, LiIon, LiFe, NiCd, NiMH, Pb Lead Acid AC/DC Professional RC Balancing Battery Charger & Discharger (Version 2) w/ Micro USB Port, Temperature Port, 2S-6S JST-XH Balance Ports

Product Code:BT-38433330

Product weight:2.10 Pounds

Our Price:

PKR 11304.00

Quantity

add to card

Order Now

Features:

High 6.0Amp Charge Rate
Balance Charges & Balance Discharges LiPo, LiON, LiFe (1S-6S cells)
Storage Mode to Preserve Battery Longevity
Charges NiMh, NiCd (1-15 cells)
AUTO charge mode for NiMh
Charges Lead-Acid (2V-20V)
Many Safety Features: Capacity Cutoff, Time Limit Cutoff, Temperature Cutoff
10 Battery Memory Storage Settings
NiMh Cycling, Charge>Discharge, up to 5 times to refresh battery life
User definable charge rates from 0.1 amps to 6.0 Amps
50 Watt max output. Charge Amperage auto adjusts depending on battery voltage.
Balance Port Built In (Balances 2S-6S Batteries)
5 charging plugs

Menu Options:

LiPo, LiIo, LiFe
Balance Charge
Charge
Fast Charge
Storage Mode
Discharge
NiMh, NiCd
Charge
Auto Charge
Discharge w/ adjustable terminal voltage
Re-Peak
Cycle
Pb (Lead Acid)
Charge
Discharge
Battery Meter (Shows voltage of each cell in lithium pack, Total Voltage, Highest Voltage, Lowest Voltage)
Internal Resistance Tester (Shows each cells internal resistance, Total Resistance, Highest Resistance, Lowest Resistance)
System Settings
Safety Timer
mAh Capacity Cutoff
Temp Cutoff (Requires optional Temp Probe.)
Temperature Units
Rest Time
NiMh & NiCd Sensitivity
Key Beep & Buzzer
Input Power Low Voltage Cutoff
Load Factory Settings
Version
Serial Number

Genuine, Authentic, Original iMax B6AC V2 Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC s website to prove its authenticity.

LITHIUM BATTERY METER: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell.

INTERNAL RESISTANCE METER: Use this function to measure the resistance in each of your lithium battery s cells. This helps determine the health of your cells, to be sure you are getting the most power out of them.

TERMINAL VOLTAGE CONTROL: The voltage at which the charger cuts off the charge to each cell can be adjusted. LiPo 4.18V-4.25V (Default 4.20V) / LiIo 4.08V-4.20V (Default 4.10V) / LiFe 3.58V-3.70V (Default 3.60V)

PC CONNECTIVITY & UPGRADABLE FIRMWARE: Control your charger and update it with new firmware via the built in USB port. The software (PC Only) can be downloaded from SKYRC s website for free.