(9:00AM to 5:00PM)
HOBBYMATE 15A ESCs have all the performance you would hope for and you will struggle to find a frame small enough to fit these
ESCs and they will still give you plenty of headroom on a standard 180 210 250 size quad! This ESC allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
Oneshot125 is a different and faster communication protocol between the flight controller and the ESC on your quadcopter.
It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
Damped mode
This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher
response to throttle decreases.
Easy upgrades
With the BLHELI software rapidly evolving, you can flash the lastest firmware using the 3pin connector and suitable USB adapter
and now can be used via the cleanflight GUI
please note you will need to be running the Betaflight firmware to connect via the cleanflight interface but this is a simple way
of adjusting and tweaking the settings of your escs.
Input: 2-4s Lipo
Constant: 15 Amps
Burst: 25 Amps
Weight: 4g bare board
Dimensions: 23x12.5x3mm
Motor wire: 70mm
Signal wire: 120mm
PCB - 4 Layer Blind hole PCB - 3oz Pour
Mosfet: N-Channel
OneShot and BLHeli 16.2 Pre Installed
Package Including
1 * HOBBYMATE 15A Mini ESC Oneshot125 Electronic Speed Controller 2-4S Brushless for FPV Multicopter
