(9:00AM to 5:00PM)
Remote Fixed type pool light first released on Amazon,Add four new technologies as below
★:We are the first company in the world to have done away with the problem of short distance associated with the remote controller. After months of hard work, our team of engineers developed a radio receiving signal amplifying circuit for the light. The remote s signal is normally greatly weakened by the water as well as the meta fixture. However, as soon as they reach the light, the circuit amplifies the signal. This is all thanks to our intelligent engineer.
Video test - https://youtu.be/Lg7_GBDwq5U
★★:We are the first company to add the memory function to the light remote. In the old models, once you choose the remote type, you are not going to have the memory function. It is only the switch type which has the memory function. To solve this problem, we added flash to the light. When you light up the light in certain modes for more than 30 seconds, the mode will be written into the flash. The next time you turn on the light, you will get the last mode that you had chosen.
★★★:we are the first company to add the remote controller and the light matching system. This helps you to avoid the other remote controller controlling your light by mistake. When the light leaves the factory, it is programmed to respond only to the remote which it is packaged with in the same box. If you buy several lights and want them all to be controlled by only one remote controller.
please follow the instructions demonstrated on this video - https://youtu.be/G9OmsV94Sok
★★★★:Add wide voltage range for the light.any voltage between 85 to 265 will be suitable for the light. this will avoid the damage when using the high voltage by mistake.
