(9:00AM to 5:00PM)
Mudder Upgraded 4pcs Anti-clockwise and Clockwise Motor for Syma X5SW X5SC X5S
Installation Guid:
Before getting started, you need Screwdriver, Cutting pliers, Soldering iron, Voltmeter, Tin lead resin for soldering, spare parts to replace the faulty components, and your patience of course.
Always disconnect the battery to prevent any short-circuit. Removed all the faulty parts and carefully replaced them with the new ones.
Solder the motor wires to the receiver board in this order(If all four motor to be replaced):
Motor M1 (anti-clockwise) - White to M1+ and Black to M1-
Motor M2 (clockwise) - Red to M2+ and Blue to M2-
Motor M3 (anti-clockwise) - White to M3+ and Black to M3-
Motor M4 (clockwise) - Red to M4+ and Blue to M4-
After soldering, Power ON the quad copter to see if all the motors spin freely and correctly.
Specification:
• Suitable for: Syma X5SW X5SC X5S
• Material: Metal
• Color: Silver
• Metal part length: Approx. 20mm/ 0.79inch
• Metal part diameter: Approx. 7mm/ 0.28inch
Package Details:
• 2pcs Anti-clockwise Motor (black and white wires)
• 2pcs Clockwise Motor (red and blue wires)
