> RobotDyn - IoT KIT 1 - WeMos D1 mini PRO ESP8266 + 32Mb flash, with ba

RobotDyn - IoT KIT 1 - WeMos D1 mini PRO ESP8266 + 32Mb flash, with basic shield sets: Dual Base Shield + ProtoShield + Button + Contact Relay + Data Logger + DHT11 for Arduino IoT kit WiFi projects

Product Code:BT-48412215

Product weight:0.40 Pounds

Our Price:

PKR 11137.00

Quantity

add to card

Order Now

IoT KIT1:
1. WeMos D1 mini PRO (32Mb) - 1 set ( ASIN: B072JSN6NL )
2. Micro USB cable (50cm) - 1 pc
3. Dual Base Shield - 1 set ( ASIN: B071JKCKDZ )
4. ProtoShield - 1 set ( ASIN: B071ZY9W71 )
5. Button Shield - 1 set ( ASIN: B071FZ84L9 )
6. Contact Relay Shield - 1 set ( ASIN: B071FZ7V87 )
7. Data Logger Shield - 1 set ( ASIN: B072JRSLS9 )
8. DHT11 shield - 1 set ( ASIN: B071FZ95GS )

WIFi D1 mini PRO is an integrated ESP8266 based WiFi enabled microprocessor unit + 32Mb (Megabit) flash memory.

On board have embedded CERAMIC WiFI antenna and socket for connecting external antenna.

For communication with PC (USB-TTL), used USB driver CP2104 (need install driver) WIFi D1 mini PRO board using the Arduino IDE.

For power IN, can use USB 5V, or and DC power 4-9V to pin 5V (if have any shield for use 5V, better power supply exactly 5V).
For connect battery, connecting to pin 3.3V

Product official page:
http://robotdyn.com/catalog/ESP/wifi_d1_mini_esp8266_dev_board_usb_cp2104/
* For get a detail information of product, instruction, schematic diagram, dimension diagram, guide and software, Pls visit to official page of product.

RobotDyn(R) - registered trademark in USA.
Zhuhai RobotDyn Technology Co.,Ltd - Developer and manufacture.

This kit is designed to study IoT with Arduino projects. It contains basic modules and sensors, with which you can make yours IoT projects. And also make projects for control devices, through WI-FI.

WIFi D1 mini PRO is an integrated ESP8266 based WiFi enabled microprocessor unit + 8/16/32Mb(megabit) flash memory.

For use WIFi D1 mini PRO board in the Arduino IDE, need install library for ESP8266