(9:00AM to 5:00PM)
Introduction
The PiCar-S is a cool smart car that can work with Raspberry Pi model B+, 2 model B and 3 model B. Equipped with three sensor modules including ultrasonic obstacle avoidance, light follower, and line follower, you can better learn the programming on how to control the car. In this manual, we will show you how to build the PiCar-S via description, illustrations of physical components, in both hardware and software respects. You will enjoy learning how all this work. You may visit our website www.sunfounder.com to download the related code and view the user manual on LEARN -> Get Tutorials and watch related videos under VIDEO, or clone the code on our page of github.com at https://github.com/sunfounder/SunFounder_PiCar-S
Specification
Supply Input Voltage: 7V-12V (by 2 18650 batteries)
Dimension: 270x170x80 mm
Package included:
1 Set x Acrylic Plate
1 * Robot HATS
1 * PCA9685 PWM Driver
1 * TB6612 Motor Driver
1 * 5-CH Line Follower Module
1 * Ultrasonic Obstacle Avoidance Module
1 * Light Follower Module
2 * 18650 Battery Holder
2 * DC Gear Motor
1 * SunFounder SF0180 Servo
2 * Rear Wheel
2 * Front Wheel
1 * USB Wi-Fi Adapter
1 * Ribbon (30cm)
1 * Cross Screwdriver
1 * Cross Socket Wrench
1 * M2.5/M4 Small Wrench
1 * M2/M3 Small Wrench
Several wires
Needed screws, nuts, and standoffs
