Product introduction
TVIRD automotive parking sensor radar collision avoidance system exercise berths safety auxiliary devices.
Its principle is to use the command and control operation of the microcomputer system, respectively, suggest azimuth and distance between car and the obstacle, ensure safe parking.
Unique features:
1. The new upgrade, dual digital display, dual-core reversing radar
2. Smart Start: The radar starts as soon as your car starts. And the monitor start to work when there are obstacles into the detection area . More humanized and scientific.
3. Multi-function button: Provides voice switch button, users can switch modes from muted, beeps, voice, or four voice + buzzer sound mode.
TVIRD Car Reversing Backup Radar System Technical Parameters:
1. Detection distance: front of the car: 0.3-0.8m ; rear: 0.3-2.3m
2. Voltage: 12v
3. Operating Current: 20mA-200mA
4. Maximum power: 2w
5. Ultrasonic frequency: 40khz detection
6. Angle: h> 80° v> 70°
7. Working temperature: -20℃ ~ + 80℃
8. Alert volume:> 70DB
Alarm Mode:
1. Voice : 3 modes to switch. The closer the obstacle is, the more rapidly the sound is.
2. Light bar : Three colors light bar, prompted obstacle distance accurately.
3. Digital Display : In the middle of the display, show obstacle distance, precise and accurate, at a glance.
Installation:
1) Probe mounting height requirement from the ground about 50CM, if the radar is too close to the ground, it will detect the ground.
2) Install the probes on perforated plastic trim look, the probes send out ultrasonic vibration for more accurate measurement.
Package Included
1x Display (cable length 6.5m)
1x Host probe
1x 22mm hole
1x Host Stickers
1x Power Cord
1x User Manual
4x Probe line
8x 22mm probe (probe line after the car length 2.5m, front length 6.5m) (Color: Silver)